INDIVIDUAL ADDRESSABLE: Each LED can have its own color and brightness. You can control each LED individually and set it to any color as you want. The brightness of the light can be adjusted.
COMPATIBILITY: Work great with Arduino, Raspberry Pi or T-1000S and also suitable for SP105E, HC008. Can appear flashing/chasing/jumping/flow water and hundreds of lighting effect with WS2811 controller.
IDEAL for DIY: Comes with 3-pin waterproof connector on both ends, you can connect the other one led module on both ends. Each pixel can be cut off without damaging the rest pixels. So you can shorten or extend the distance between two pixels if you want.
IP68 WATERPROOF: Waterproof silicone wraps every LED pixel, protects it excellent well and makes it easy to clean. Widely use for holiday decoration both indoor and outdoors, even underwater.
WIDE APPLICATION: Can be used for party, wedding, festival and home DIY lighting. It also great as decorative and atmosphere lighting for architectural, bar, club, theater, store, restaurant etc.
Model: WS2811 LED pixel light
light source: F8 RGB
IC Model: WS2811 IC
Quantity: 50 LEDs /string
LED Shape: Round
LED Spacing: Each led spacing is 0.9in.
Wire Color: Mix Colors
Wire Gauge: 22AWG, diameter 0.04in, normal current 3.2A, max 3.7A
Color: full color, 24-bit
Gray level: 256
Operating voltage: DC 12V
Waterproof: IP68 waterproof
It comes without power supply and controller. You'll need a controller such as an Arduino to use them.
The work voltage of the LED string must be 12V DC. Otherwise, it will be burnt out.
If you want to hook up more than one LED pixels light, an external power supply is very necessary.
1 Set of 50pcs WS2811 12V 12mm LED Pixels Module light
CE and RoHS approved