PX24500 DMX512 Decoder DMX Driver RGB Controller offers you to connect your RGB LED light strips or RGB LED
Modules to DMX512 or DMX1990 lighting controllers. Then by using PWM and DMX software, you can change the color
and dimming of your RGB LED lights. For DC 12V to 24V systems only. Includes one 6' Cat5 cable with RJ45 jack connectors.
5A per channel with a maximal power of 180W/12V DC or 360W/24V DC. For use with 4 pin, 3 loops, common anode style
RGB LED and LED Lighting. Can be connected to DMX512 signal using RJ45 connectors and Cat5 cables. Unit has DIP switches
on the side to manually change the DMX address of each driver. Each PX24500 Driver uses 3 DMX addresses.
RGB LEDs and power supply are connected using screw down style connectors. RoHS, CE approved.
Full color 16 million colors and 256 grey level.
Decode channel: 1~3
Input signal: DMX512(1990)
Output signal: 0~24v PWM signal
Power supply: DC12~24V
Power dis: <5w
Power output: <24v; <12v
Operating temperature: 0~70C
DMX type: DMX 512, DMX 1990
Power Output: 180W/12V DC, 360W/24V DC
Rating: Dry
Can be used on 12V or 24V DC
5A Per Channel, 3*5 = 15A
Size: approx L18 x H3.5 x W4 cm
Fully dip switch enabled
Meets DMX512 protocol standards
256 levels of brightness with full colour control
3 output channels, can drive 5A on each
With a suitable control system, you can express any effect perfectly
Our units have a high interference resistance against over heating and over current protection
Waterproof: IP43, Only Indoor Use
Package Included:
1 Piece of PX24500 DMX decorder (PX24500 RGB Controller DMX Driver)
1 Piece of 2 Meters RJ45 cable
CE and RoHS approved
